English RussianLatvian

 

Main Page Equipment Laser equipment e.Laser

e.Laser

The new integrated Laser system for Embroidery Machines...
 

Embroidery Laser eLaser The new Proel laser machine "e.Laser" works together with embroidery machine to create a very accurate and efficient system for fabric laser cutting and fabric laser engraving placed on the frame of the embroidery machine. This new laser system (patents pending solution) doesn't require electrical or mechanical changes on the embroidery machine.

The e.Laser can be mounted on any existing or brand new embroidery machine. The system makes an automatic control of laser power accordingly to the frame movement. The laser cut is very accurate because the laser source is perpendicular to the working plane having a very small laser spot. With this small laser spot you can cut any materials and even thick materials.

The laser system is able to work on the entire working area of embroidery frame. The "e.Laser" can be used for any type of production, from the small embroidery business, or craftsman studio (with a single head embroidery machine), to the large industry (multihead embroidery machines). 

MAIN FEATURES
  • PATENTS PENDING SOLUTION
  • SIMPLE INSTALLATION AND CUTTING FILES CREATION
  • EASY INSTALLATION
  • NO MECHANICAL OR ELETRONIC MODIFICATIONS TO THE EMBROIDERY MACHINE
  • INEXPENSIVE SYSTEM

The e.Laser is a CO2 Laser machine equipped with a 25 or 50 Watt CO2 laser source. During the cycles of laser cutting and laser engraving, to the cutting head is sent a flow of air  is sent to the cutting head in order to maintain clean  the focusing lens, avoiding burnings on material: this in order to have very defined and clean cuts. The smokes produced during  laser cutting or laser engraving, are evacuated by an external suction machine. The machine is equipped with a internal smoke suction device.


USABLE SOFTWARE for LASER CUTTING
Proel software for laser cutting FOCUSCUT III is the best program to manage laser cuts with e.Laser because the operator can use a lot of automatic tools for: auto-recognizing the embroidery edges, creating laser lettering and true type laser lettering, automatic creation of kiss cutting levels, etc. Possible also to manage the laser cuts with any client punching system.

TECNICAL SPECIFICIFICATIONS

Electrical input
1phase 220/240 Vac ±10% - 50/60Hz ±2%
Absorbed power max
3000 VA
Dimensions (WxDxH)
284x492x1253 mm
Weight max.
80 Kg
Noise emission
< 70 dB (with internal fumes suction unit)
Working area (WxD)
the same of embroidery machine
Fumes extraction
top suction system
Fumes suction
external and internal unit
Laser source type
CO2 - 10.6 µm - sealed type - RF Air liquid cooled
Laser power
25W / 50W
Laser beam delivery  
Laser spot diameter
140 µm
Cutting speed
depending on the embroidery machine
Resolution
the same of embroidery machine
Optics cleaning
internal or external air / external gas
Software
Focuscut III or client punching
Laser product Class
class 1 (EN-60825-1:2003-02)
class I (USA-CDRH 21 CFR)
Safety devices
protective enclosures + laser beam stop access panel with safety interlocks

The Manufacturer reserves the right to make modifications and improvements without prior warning.

 

         

JavaScript is disabled!
To display this content, you need a JavaScript capable browser.

 

         

JavaScript is disabled!
To display this content, you need a JavaScript capable browser.